June Issue Extra: Moving Maneuvers

2. Push the spreader at a consistent speed (approximately 3 miles per hour is recommended).

3. Always close the operating lever before filling the hopper.

4. Be sure the screen is in place to prevent lumps or paper scraps from plugging the holes in the hopper bottom.

5. Always start walking forward before opening the operating lever. Close the operating lever before forward motion is stopped.

6. Hold the handle at a height that will keep the impeller level.

7. Empty the spreader after each use. Wash the spreader thoroughly and allow it to dry. Keep the impeller clean.

8. Lubricate all moving parts. Apply grease to the five grease fittings – two in the axle supports, two in the gear support and one in the idler wheel (if the idler wheel has a steel hub). – LESCO

The author is Managing Editor of Lawn & Landscape magazine and can be reached at nwisniewski@lawnandlandscape.com.