Six products from DAP

For laying blockwork in retaining walls, garden walls and water feature perimeters, one 12 oz. can yields approximately 240 lin. ft. at 1/2" bead. For use on landscape blocks, brick, natural and synthetic stone, wood, concrete, treated wood and other hardscape materials. SmartBond Landscape offers adhesion and gap bridging. The product exceeds ASTM C557. Connect the safety pin to the nozzle and the product remains reusable for up to 30 days.

 

 

 

 

 

 

 

 

 

 

A self-leveling concrete and mortar sealant that requires no tooling, making it good for filling cracks and gaps in horizontal surfaces. Withstands foot and vehicle traffic after fully cured. It can be applied in all weather and below freezing temperature applications. It won’t crack or shrink and provides adhesion, flexibility and durability for a permanent waterproof seal. It can be exposed to water and moisture after only three hours without washing out rather than the 24-36 hour waiting period other caulks and sealants may require. It is paintable, low odor and VOC compliant. Backed by a lifetime guarantee.

 

 

 

 

 

 

 

 

 

 

 

 

A one-part, moisture-curing, non-sag elastomeric commercial-grade sealant. It is specifically formulated to provide a long-lasting, durable seal when filling exterior gaps, joints and cracks. This sealant offers adhesion to most substrates and remains flexible to withstand up to ±35 percent joint movement when installed into a properly prepared joint. Handles foot and vehicle traffic. Paintable. Indoor/Outdoor use. Meets or exceeds ASTM C920, Type S, Grade NS, Class 35. Use T, NT, O, M, I. CAN/CGSB 19.13-M87 and Federal Specification TT-S-00230C, Type II, Class A.

 

 

 

 

 

 

 

 

 

A patching compound formulated to stop running water through deep cracks, holes and imperfections in concrete and masonry surfaces. It creates a watertight seal in 3-5 minutes, even while water is flowing. It works both above and below ground level. Also works as fast-setting anchoring cement to permanently anchor fence and railing posts, bolts, machinery and fixtures into concrete and masonry surfaces. Interior/exterior use.

 

Concrete Patcher & Resurfacer is a fast-setting polymer-fortified Portland cement patch. A product for the repair of cracks chips and breaks in concrete and masonry. It adheres to concrete, brick, stone, stucco, wood subfloors and other clean masonry surfaces. Crack resistant formula.

 

 

 

 

 

 

 

 

 

 

A solvent-based wood filler that hardens to give a repair that is 3X stronger than the wood itself (when compared to white pine). This wood filler contains real wood fibers so it looks and acts like real wood. It can be sanded, cut, drilled, screwed, planed, stained, varnished, painted or lacquered. It provides strong nail and screw anchoring without splitting. DAP Plastic Wood Professional Wood Filler dries fast and hard, and is shrink and crack resistant. For use on furniture, doors, paneling, molding, plywood and other wood surfaces. Available in several popular wood shades, this wood filler can also be stained to match any wood shade. For interior/exterior use.